Use the chart that corresponds to the piece you're considering. Different Toxic Society garments may fit differently even when they share the same labeled size.
Fit and sizing
Size Guide
Garment measurements. Real fit guidance. Less guessing.
Find Your Fit
Lay a similar tee or hoodie flat without stretching it. Comparing garment to garment is usually the easiest way to understand how a new piece will fit.
If your measurements fall between two sizes, consider how you want the garment to fit. Choose the smaller size for a closer silhouette or the larger size for more room and easier layering.
Not every product is offered in every size. Available sizes are shown on each product page.
How to Measure
Lay a similar garment you already own flat on a smooth surface without stretching it. Measure using the points below, then compare those measurements to the corresponding product chart.
Tees
Measurements are taken with the garment laid flat and are approximate. Actual dimensions may vary by up to 1 inch (2.54 cm). For the best fit, compare these measurements with a similar garment you already own.
CHEST WIDTH
Across the garment laid flat, not the full chest circumference.
BODY LENGTH
From the highest shoulder point to the bottom hem.
TEE SLEEVE LENGTH
From the neck/shoulder point to the sleeve hem, as shown in the diagram.
Hoodies
Chest width and body length are measured the same way as on our tees above. Some of our hoodies are cut differently, so sleeve length is measured in different ways. Find the method that matches the column heading of your hoodie's measurement chart.
HOODIE SLEEVE LENGTH
Measure from the shoulder seam down the outside of the sleeve to the end of the cuff.
RAGLAN SLEEVE LENGTH
Measure from the neckline where the raglan sleeve begins, down the outside of the sleeve to the end of the cuff.
Sweatpants
Lay the sweatpants flat on a smooth surface without stretching them. Use the points below to compare against the corresponding sweatpants chart measurements.
INSEAM
Lay the garment flat and measure from the crotch seam straight down the inside of the leg to the bottom of the leg opening.
WAIST
Measure straight across the waistband with the garment laid flat. The chart shows the waistband's approximate fit range for each size.
FRONT
Lay the garment flat and measure from the crotch seam up the front to the top of the waistband.
Fit By Garment
Midweight Supima® Tee
A midweight unisex tee with a classic, balanced fit through the shoulders, chest, and body. Made from 6 oz 100% American-grown Supima® cotton, the fabric has an exceptionally soft, smooth feel with a subtle natural sheen. The silhouette is clean and structured without the exaggerated width of an oversized tee.
Fit guidance
Choose your usual tee size for the intended classic fit. If you prefer a roomier silhouette, consider sizing up. For the most accurate fit, compare the chest width and body length below with a tee you already own.
Garment Measurements — Inches
| Size | Body Length | Chest Width | Sleeve Length |
|---|---|---|---|
| XS | 26" | 18" | 11" |
| S | 27" | 19.5" | 12.25" |
| M | 28" | 20.5" | 14" |
| L | 29" | 21.5" | 15" |
| XL | 30" | 23" | 17" |
| XXL | 31" | 24.5" | 18.25" |
Garment Measurements — Centimeters
| Size | Body Length | Chest Width | Sleeve Length |
|---|---|---|---|
| XS | 66.0 cm | 45.7 cm | 27.9 cm |
| S | 68.6 cm | 49.5 cm | 31.1 cm |
| M | 71.1 cm | 52.1 cm | 35.6 cm |
| L | 73.7 cm | 54.6 cm | 38.1 cm |
| XL | 76.2 cm | 58.4 cm | 43.2 cm |
| XXL | 78.7 cm | 62.2 cm | 46.4 cm |
Measurements are approximate and may vary by up to 1 inch (2.54 cm). Chest width is measured across the garment laid flat.
After Washing
This garment is pre-shrunk and treated to minimize shrinkage, although slight changes in fit may still occur after washing. Turn inside out, machine wash cold with like colors, and hang dry to help preserve the fabric's softness, shape, color, and printed artwork.
Heavyweight Organic Brushed Hoodie
A substantial heavyweight hoodie constructed from 400 GSM fleece with a soft, brushed interior and a classic unisex fit. The fabric combines an organic cotton face with a plush interior for a structured yet comfortable feel, while wide, double-folded ribbed side panels provide additional flexibility and movement.
Fit guidance
Choose your usual hoodie size for the intended classic fit. If you prefer a roomier silhouette or additional layering space, consider sizing up. For the most accurate fit, compare the chest width and body length below with a hoodie you already own.
Garment Measurements — Inches
| Size | Body Length | Chest Width | Hoodie Sleeve Length |
|---|---|---|---|
| XS | 26" | 21.5" | 24.5" |
| S | 27.25" | 22.25" | 25" |
| M | 28.5" | 23.5" | 25.5" |
| L | 30" | 24.5" | 26" |
| XL | 31.5" | 25.5" | 26.5" |
| XXL | 33" | 26" | 27" |
Garment Measurements — Centimeters
| Size | Body Length | Chest Width | Hoodie Sleeve Length |
|---|---|---|---|
| XS | 66.0 cm | 54.6 cm | 62.2 cm |
| S | 69.2 cm | 56.5 cm | 63.5 cm |
| M | 72.4 cm | 59.7 cm | 64.8 cm |
| L | 76.2 cm | 62.2 cm | 66.0 cm |
| XL | 80.0 cm | 64.8 cm | 67.3 cm |
| XXL | 83.8 cm | 66.0 cm | 68.6 cm |
Measurements are taken with the garment laid flat and are approximate. Actual dimensions may vary by up to 1 inch (2.54 cm).
After Washing
This garment is pre-shrunk and treated to minimize shrinkage, although slight changes in fit may still occur after washing. Turn inside out, machine wash cold with like colors, and hang dry to help preserve the fabric's softness, shape, color, and printed artwork.
Mineral Washed Heavy Fleece Hoodie
A heavyweight unisex hoodie cut from 14 oz, 100% cotton fleece and mineral-washed after construction for a broken-in finish. The silhouette is loose and substantial, with a shorter, more compact body length than our Organic Brushed Hoodie.
Fit guidance
Choose your usual hoodie size for the intended relaxed fit. If you prefer a cleaner silhouette, compare the chest width and body length below with a hoodie you already own before sizing down.
Garment Measurements — Inches
| Size | Body Length | Chest Width | Hoodie Sleeve Length |
|---|---|---|---|
| S | 26 1/2" | 20 1/8" | 23 1/2" |
| M | 27 3/4" | 22 1/8" | 23 7/8" |
| L | 28 7/8" | 24 1/8" | 24 3/8" |
| XL | 30" | 26 1/8" | 25" |
| XXL | 31 1/8" | 28 1/8" | 25 1/2" |
Garment Measurements — Centimeters
| Size | Body Length | Chest Width | Hoodie Sleeve Length |
|---|---|---|---|
| S | 67.3 cm | 51.1 cm | 59.7 cm |
| M | 70.4 cm | 56.2 cm | 60.6 cm |
| L | 73.3 cm | 61.3 cm | 61.9 cm |
| XL | 76.2 cm | 66.3 cm | 63.5 cm |
| XXL | 79.0 cm | 71.4 cm | 64.7 cm |
After Washing
This garment is mineral-washed after construction, so coloration may vary naturally from piece to piece. Mineral washed hoodies should ideally be washed separately, as color transfer may occur. Measurements may vary slightly due to standard garment tolerance and the mineral-wash process. Wash cold and follow the care instructions on the product page to best preserve its fit, color, and printed artwork.
Ultra Heavyweight Organic French Terry Hoodie
An ultra heavyweight unisex hoodie built from 500 GSM, 100% certified organic cotton French terry with raglan sleeves. The fit is relaxed and oversized, with generous room through the body and sleeves.
Fit guidance
Choose your usual hoodie size for the intended oversized fit. If you prefer a closer silhouette, compare the chest width and body length below with a hoodie you already own before sizing down.
Garment Measurements — Inches
| Size | Body Length | Chest Width | Raglan Sleeve Length |
|---|---|---|---|
| S | 25.5" | 24" | 29" |
| M | 26.5" | 24.5" | 30" |
| L | 27.5" | 25" | 31" |
| XL | 28.5" | 26" | 32" |
| XXL | 29" | 27" | 32.5" |
Garment Measurements — Centimeters
| Size | Body Length | Chest Width | Raglan Sleeve Length |
|---|---|---|---|
| S | 64.8 cm | 61.0 cm | 73.7 cm |
| M | 67.3 cm | 62.2 cm | 76.2 cm |
| L | 69.9 cm | 63.5 cm | 78.7 cm |
| XL | 72.4 cm | 66.0 cm | 81.3 cm |
| XXL | 73.7 cm | 68.6 cm | 82.6 cm |
After Washing
The garment is pre-shrunk, though a small amount of natural shrinkage of approximately 0–3% may occur. Measurements may vary by approximately 1.5 inches due to standard garment tolerance. Machine wash cold, inside out, with like colors, and hang dry to best preserve its fit and printed artwork.
Organic Heavyweight Brushed Sweatpants
A heavyweight jogger cut from 400 GSM brushed fleece with an adjustable drawstring waist and elasticated cuffs. The standard fit has room through the hip and thigh, tapering toward the cuff.
Fit guidance
Choose your usual size for the intended standard fit. If you're between sizes, compare the waist and front measurements below with a pair of sweatpants you already own before ordering.
Garment Measurements — Inches
| Size | Inseam | Waist | Front |
|---|---|---|---|
| XS | 32" | 26–30" | 12" |
| S | 32" | 28–32" | 12.5" |
| M | 32" | 30–34" | 13" |
| L | 32" | 32–36" | 13.5" |
| XL | 32" | 34–38" | 14" |
| XXL | 32" | 36–40" | 14.5" |
Garment Measurements — Centimeters
| Size | Inseam | Waist | Front |
|---|---|---|---|
| XS | 81.3 cm | 66.0–76.2 cm | 30.5 cm |
| S | 81.3 cm | 71.1–81.3 cm | 31.8 cm |
| M | 81.3 cm | 76.2–86.4 cm | 33.0 cm |
| L | 81.3 cm | 81.3–91.4 cm | 34.3 cm |
| XL | 81.3 cm | 86.4–96.5 cm | 35.6 cm |
| XXL | 81.3 cm | 91.4–101.6 cm | 36.8 cm |
After Washing
The garment is pre-shrunk to help minimize shrinkage. Measurements may vary by approximately 1 inch due to standard garment tolerance. Machine wash cold, inside out, with like colors, and hang dry to best preserve its fit and printed artwork.
A Note on Garment Measurements
Garments are cut and sewn products, so minor measurement variation can occur from piece to piece.
Use the charts as a fit reference rather than an exact dimensional guarantee. For the most accurate comparison, measure a similar garment you already own using the same method shown above.
Still Unsure?
Send us the measurements of a tee or hoodie you already own and like the fit of, along with the Toxic Society piece you're considering.
We'll help you compare the measurements and choose the size that makes the most sense.
Eligible U.S. size exchanges are free and subject to inventory availability.